Application:
Used for mixing all kinds of liquid products in pharmaceutical, food, chemial and biological fields.
Various agitators
1.Bottom magnetic agitator with propeller impeller, speed from 50-400rpm or 50-800rpm. This kind of agitator is mixing thin viscosity , such as eyedrop, injection, CIP liquid, water, etc...
2.Top mechancial agitator with propeller impeller, speed at fix 71rpm or adjustable 20-200rpm or special requirement. this kind of agitator is mixing syrup, injection, blood, oral liquid,
3.Top mechanical agitator with anchor or frame impeller, speed is from 10-70rpm. it is mixing higher viscosity , such as sediment or viscosity oral liquid, etc....
4.top emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this kind of agitator is mixing most high viscosity , such as suspension, oil, fat emulsification , etc
5.Bottom emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this kind of agitator is mixing most high viscosity , such as suspension, oil, fat emulsification
If client need, one tank can install two agitator together.
|
Parameters |
|
Material |
SS304 orSS316L |
|
Capacity |
50L-30000L |
|
Surface finish |
1.Matt polish ;2 Mirror polish ;3 Acid wash and pickling ;4 sand blasting |
|
Production Quality Management |
Meet GMP medical standard |
|
Design and produce standard |
JB/T4735-1998 or GB150-2011 or ASME |
|
Operate pressure |
ATM or pressure vessel (-0.1~1Mpa) |
|
Operate temperature |
Minus 20 degree to 200degree |
|
Welding type |
Argon Arc Welding |
|
Consrtuction type |
Vertical type or Horizontal type |
|
Structure |
1.Single layer 2.shell with jacket 3.Shell with jacket and insulation ,4.shell with insulation |
|
Jacket type |
1.Dimple Jacket ,2.full jacket ,3.Coil jacket |
|
Jacket function |
Heating or cooling |
|
Heating type |
1.Electrical heating ,2.steam heating 3. hot water |
|
Insulation material |
Rock wool or Perlite |
|
Standard Components |
Manhole or hand hole ,Spray ball ,Inlet ,outlet ,spare port |
|
Optional accessory |
SIP ,vent filter ,sight glass ,pressure gauge, temperature sensore PT100 ,level sensor ,load cell ,valves ,PLC control or simple control cabinet ,agitator and so on |
Mixing Tank Structure
